A: The Aeroseal process seals duct leaks from the inside, using small sealant particles that deposit at the leaks without coating the interior of the duct system. This is accomplished by pressurizing the duct system with a fog of sealant particles sized to stay suspended in the air until they try to exit the duct system. By blocking all of the intentional openings in the duct system (i.e., diffusers or grilles), all of the sealant-laden air is forced out through to the leaks. As the duct pressure causes the particles to accelerate through the leaks, they stick to the edge and build upon each other until the leaks are sealed. By constantly monitoring the duct pressure and flow, the process-control computer calculates and the displays the remaining leakage in real time. When the sealing is finished, a complete minute-by-minute record of the process is printed, stored on the local computer, and then uploaded over the internet for archival on the Aeroseal server.